Tuesday, September 30, 2008

Eat Me!

NovaFlash

Eat Me is a Stereo Bit Crusher


RSP10

NovaFlash

A multiFX plugin consisting of a Ring Modulator, Saturation, and a Phaser

Fyltox Solo

NovaFlash

Fyltox Solo is a stereo multi-filter for live performance


Sunday, September 28, 2008

TDAe FD Stereo Filter Delay


The FD STEREO is a filter delay with separate controls each stereo channel. The delayed sound is sent over a filter, that can be mixed between Lowpass and Bandpass to modify the sound. The step control is based upon the playing speed of the host.

  • Step-controlled Delay (1-16)
  • Feedback control
  • Separate controls for each stereo channel
  • Dry/Wet control
  • Delayfilter cutoff and resonance
  • Adjustable Lowpass/Bandpass mix

Saturday, September 27, 2008

TDAe MP5D Multipass Filter With LFO


The MP5D is a filter plugin with separate lfos for modifying the cutoff and resonance dynamically.

  • Multipass Filter for LP, HP, BP, Notch and Peaking
  • LFO for Cutoff with a max. speed of 2Hz
  • LFO for Resonance with a max. speed of 2Hz
  • Master Section with Clipping

  • The LFO Depth set is calculated by the settings for Cutoff/Resonance and will have a maximum range of the value between the Cutoff/Resonance settings and the highest (if higher than 50%) or the lowest (if lower than 50%) value, so that the LFO spins around the set value for Cutoff/Resonance.

An Example: If is set a Cutoff value of 75% and the Cutoff LFO-depth is set to 100%, the LFO will spin the cutoff between 50% and 100% with the set value for LFO-speed. That means, that a set value for Cutoff/Resonance of 0% or 100% will not affect a LFO modulation.


Friday, September 26, 2008

TDAe EQ2008 8 Band Equalizer


The EQ 2008 is an 8-band equalizer with a range of +/-20dB and fixed frequencies.

  • 8-Band Equalizer
  • Input amplifier
  • Master Section with Clipping

Thursday, September 25, 2008

TDAe EQ2004P 4 Band Parametric Equalizer


The EQ 2004P is a 4-band parametric equalizer with a range of +/-20dB. The frequency and Q of every band can be set manually.

  • 4-Band Parametric Equalizer
  • 4x Frequency Control
  • 4x Q Control
  • 4x Gain Control
  • Output amplifier

Wednesday, September 24, 2008

TDAe EQ2032 32 Band Equalizer


The EQ 2032 is a 32-band equalizer with a range of +/-20dB and fixed frequencies. The selected frequency and gain is shown in the display.

  • 32-Band Equalizer from 16Hz to 20kHz
  • +/-20dB range each band
  • Dry/Wet mix and output gain controls



Tuesday, September 23, 2008

TDAe DT424 Distortion


The DT 424 is a distortion plugin with separate high- and low frequency distortion, controllable using the threshold settings, pre- and post gain. The 4-band equalizer modifies the distorted sound additionally.

  • separate Low and Highfrequency distortion
  • pre-gain, threshold and post-gain distortion controls
  • 4-Band equalizer for additional sound control
  • output amplifier

Monday, September 22, 2008

TDAe EQ2008S 8 Band Stereo Equalizer


The EQ 2008S is an 8-band equalizer with separate controls for each stereo channel, a range of +/-20dB and fixed frequencies.

  • 8-Band Equalizer each stereo channel
  • +/-20dB range each band
  • Input pre-gain control
  • Dry/Wet mix control each stereo channel
  • Output volume control
  • Initialize and random controls
  • Value display for exact adjustment
  • Support for 16 presets each bank
  • 11 presets included
  • Channel link control

Sunday, September 21, 2008

Distroyr


Distroyr is a free stereo distortion VST effect which features a range of different algorithms that effect and generally distort the incoming audio. Depending on the settings you can have analog sounding warmth to your sound to very heavy clipped and crushed sounds. There are a total of 7 different distortion processes including:

  • Feedback
  • Signal clipping
  • Bit crush
  • Valve distortion
  • Saturate
  • Overdrive

Saturday, September 20, 2008

Distortionator


A simplistic distortion plugin, with two modes. The first mode is a modified threshold-type distortion (although the modification isn't particularly noticeable, sound-wise). The second mode is called Sine Wave distortion, although it's actually closer to frequency-modulation.

Friday, September 19, 2008

Clip-R


Clip-R is a stereo effect which allows you to trim/clip the ceiling (top) and floor (bottom) of any audio you put through it, it also features a boost control which happens before the clipping and can be used to distort the signal in combination with clipping. The left channel is shown in green and the right in red, the clipping level is show in black and this lets you see exactly what is happening to the signal. The effect works well on basses and basic waveforms like a saw etc and can change the shape.

Thursday, September 18, 2008

Cyanide


Cyanide is a unique waveshaping distortion effect that gives you a great deal of control over the wave shape.


Wednesday, September 17, 2008

Crow Preamp Emulator


Crow Preamp emulates the way tube preamps behave and sound. It will add the typical saturation and warmth of real tubes to your digital tracks!

Crow preamp emulator is very easy to use, and there are only a few parameters for you to handle: input level, tube drive amount, tube type selection, output level and a power switch.


CMT Bitcrusher


CMT Bitcrusher is an easy to use, opensource distortion / bit crusher / downsampler plug.


Tuesday, September 16, 2008

Christortion

Christian Budde

The plug-in simply excites the harmonics of the input signal. It is also possible to invert the phase of each harmonic. This concept guarantees a very surgical control over the distortion produced.